lmi pumps
BPE Engineering > pH Neutralization Systems > pH PLUS Family

Burt Process Equipment's PHX Neutralization Systems are engineered, integrated and completely prepackaged units with automatic controls and instrumentation designed for ease of installation and maximum reliability. The compact design offers a minimum size footprint and minimum installation expense. Due to its integrated design, only influent, effluent, and vent piping along with electrical line power connections are required in the field. All components are thoroughly tested prior to shipment to ensure reliability and ease of start-up.

The PHX module is designed for use as a continuous flow pH adjustment system for flow rates up to 50 GPM and a pH of 1-14
or can be used as a batch treatment system when run manually or with optional batch controls.

In the continuous flow mode, the influent is directed through the reaction chamber achieving adequate retention time for neutralization. The tank volume is sized for proper retention time based on flow rate and change in pH. A pH probe and controller provides a proportional signal to the metering pumps to dispense the correct amount of reagent chemicals. An agitator provides the required amount of pumping action for ample tank turn over to provide complete blending. The injection points, inlet, outlet, and agitator are strategically located for reliable, accurate performance.

The effluent leaving the process may be monitored by a second pH probe in an effluent wet well assembly providing a permanent record of pH by means of a circular chart recorder.

System Features:

• PLC/HMI Control For Setpoints and Status
• Customer Speciied PLC/HMI Capabilities
• Optional UL508A Listed Controls

Available Options:

• Secondary Containment
• Liquid Level Controllers
• Pump Transfer Stations
• Batch Collection Tanks
• Flow Monitoring Equipment
• PHX Single Reagent Systems
Simple and Reliable Compliance in One Compact and Affordable module...

Modules

pH PLUS Continuous Flow and Batch Treatment Modules
MODEL PHX-100 PHX-200 PHX-300 PHX-400 PHX-500
Continuous Flow Capacity (Nominal GPM)
10
20
30
40
50
Mix Tank Volume (Gal.)
100
200
300
400
500
Reagent Tanks Volume (Gal.)
20
20
20
30
30
Reagent Pumps Capacity
5.0
5.0
5.0
10.0
10.0
Reaction Mixer (HP)
0.25
0.25
0.25
0.25
0.25
Dimensions (ft.-in.)
Length A
2'-0''
2'-11.5''
3'’-11.5''
5'-4''
6'’-4''
Width B
4'-1''
4'-1''
4'-1''
4'-1''
4'-1''
Height C
5'-9''
5'-9''
5'-9''
5'-9''
5'-9''
Electrical Power (Amps)
12.0
12.0
12.0
12.0
12.0
Weight (lbs.)
Wet
1290
2275
3235
4220
5205
Dry
375
425
490
560
630

For high purity waste streams found in Research Labs, Semiconductor Facilities and Biotech Firms... consider Burt Process Equipment's Lab MASTER series with built-in pretreatment.

If you need the Intrinsic safety of a batch system or have widely fluctuating flow rates you may want to consider Burt Process Equipments ACS Assured Compliance System series of pH Neutralization Systems.

For bulk chemical transfer, solids separation, heavy metal removal systems... consider Burt Process Equipment's Spec Master System series with built-in pretreatment.

OTHER PRODUCTS